My Farm Mac OS

• My Farm Mac Os Catalina
• My Farm Mac Os 11
• My Farm Mac Os Download
• My Farm Mac Os X

From the menu bar on your Mac, select the Apple icon on the top left Select 'About This Mac' from the drop down menu This will tell you what year your Mac was made, the version of macOS or OS X you're currently on, the computer's RAM (Memory), processor, and which graphics card your Mac has. Farmer Mac operates as a secondary market for those operating in rural America. Farmer Mac helps to connect rural homebuyers, farmers, and ranchers with low-cost credit whether to fund their farming business or to buy a home in a rural area. Click to See the Latest Mortgage Rates. A few of the things Farmer Mac offers include. Note how this is different from re-installing OS X with Internet Recovery, which loads entirely from the internet, and then reinstalls the original version of OS X which came with the Mac instead, that method is sometimes necessary if the standard recovery option doesn't load, or if you want to reinstall the original version of OS X for the.

NOTE:

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) or Big Sur (11.xx.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the native smart card ability (very bottom of macuninstall link above)

If you purchased your Mac with OS Catalina (10.15.x) or Big Sur (11.xx.x) already installed, you can skip the uninstall part above and follow the instructions below.

6 'high level' steps needed, follow down the page to make this a painless systematic process

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report..' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331, SCR-3310 v2.0, GSR-202, 202V, 203, or SCR-3500a reader. If you have a reader other than these 6, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for 'SCRx31 USB Smart Card Reader.' If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 5.25, you need to update your firmware to 5.25. If you are already at 5.25, your reader is installed on your system, and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1b-SCR-3310 v2.0 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for 'SCR3310 v2.0 USB Smart Card Reader.' If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 6.02, it will not read the 'G+D FIPS 201 SCE 7.0' CAC on Mac OS 11.xx.x or 10.15.7. I contacted HID (the company that makes these readers) on 14 DEC 2020 to find a way to update the firmware to 6.02. They said there is not firmware update for the reader. If your reader is older, you may need a new one. Please look at: https://militarycac.com/usbreaders.htm to find a compatible one. If you are already at version 6.02, your reader should work fine on your Mac and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1c-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Step 3b: Look below Mac OS X for: Example: Version 10.X.X, or 11.X

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the seven shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to click, select Download Linked File As.. on each link) Save to your downloads folder

Please know.. IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD EMAIL CA-33 through DOD EMAIL CA-34,

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD ID CA-33 through DOD ID CA-34,

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59

DOD ID SW CA-35 through DOD ID SW CA-38,

DOD ID SW CA-45 through DOD ID SW CA-48,

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58, and

DOD SW CA-60 through DOD SW CA-61

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding

Clearing the keychain (opens a new page)

Please come back to this page to continue installation instructions.

Step 5a: DoD certificate installation instructions for Firefox users

NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability

Download AllCerts.zip, [remember where you save it].

double click the allcerts.zip file (it'll automatically extract into a new folder)

Option 1 to install the certificates (semi automated):

From inside the AllCerts extracted folder, select all of the certificates

click (or Right click) the selected certificates, select Open With, Other..

In the Enable (selection box), change to All Applications

Select Firefox, then Open

You will see several dozen browser tabs open up, let it open as many as it wants.

You will eventually start seeing either of the 2 messages shown next

If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

or

'Alert This certificate is already installed as a certificate authority.' Click OK

Once you've added all of the certificates..
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Option 2 to install the certificates (very tedious manual):

Click Firefox (word) (upper left of your screen)

Preferences

Advanced (tab on left side of screen)

Certificates (tab)

View Certificates (button)

Authorities (tab)

My Farm Mac Os Catalina

Import (button)

Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.

Note: You have to do this step for every single certificate

Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK

Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

Once you've added all of the certificates..
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Step 6: Decide which CAC enabler you can / want to use

Only for Mac El Capitan (10.11.x or older)

After installing the CAC enabler, restart the computer and go to a CAC enabled website

NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x), Catalina (10.15.x), and Big Sur (11.1) computers no longer need a CAC Enabler.

Skeletonlike mac os. Try to access the CAC enabled site you need to access now

Mac support provided by: Michael Danberry

For years the standard in biomass byproduct removal has been the use of landfills. Not only are they inefficient, but they're dangerous as well – contaminating soil, groundwater, and emitting dangerous gases. Through the Anaerobic Digestion process, Mac Farms uses bacteria to help break down biomass byproducts, creating methane gas which can then be used to produce electricity. Your waste goes from being an inconvenient environmental pollutant to a valuable energy resource.

With convenient, safe and simple access to our facility, we can easily facilitate your transport preference to help get your refuse in an eco-friendly location. Not only will you feel better knowing that your waste isn't just taking up space, but you'll also have the assurance of knowing that you are becoming a leading contributor to the protection of our environment.

My Farm Mac Os 11

Featured Articles

The Mac Farms Digestion Laboratory is an on-site process control laboratory located in the operation control center. Daily tests are performed on both the bladder and tank digesters. Currently, Percentage Total Solids (TS) is also analyzed on both digestates 2-3 times per week, with additional TS testing analyzed on belt filter press solids during press operation. Belt Press analysis includes jar testing polymer and coagulant dosages. Other process testing includes pH testing of incoming waste loads that are sent (fed) to the bladder. The Mac Farms Digestion Laboratory, although currently in its growing stages, will eventually include organic load testing and percent reduction. There is also interest in microscopy to monitor the digesters' bacteria population with emphasis on key microorganism presence or absence, ultimately revealing the system's health. Other testing may also include biogas composition and purity analyses.

WASTE PREPARATION

Once your biomass byproducts are delivered to our facility, we begin a pre-treatment process with the material so that it can be introduced into our Anaerobic Digester. Mac Farms then introduces special bacteria, or 'bugs', that consume your refuse and break it down even further through the Anaerobic Digestion process.

DIGESTION

Following your refuse pre-treatment, all materials are then loaded into the digester. The digester bacterium will then begin conversions of the organic compounds within your waste to methane and CO2.

RENEWABLE RESOURCES

One byproduct of the digestion process is biogas, which can be collected and converted to electricity. The remaining materials are stabilized, cured and de-watered, resulting in a rich organic fertilizer and compost additive.

Anaerobic digesters utilize either mesophilic or themophilic bacteria. At Mac Farms, Inc., we utilize mesophilic bacteria, which requires much lower environmental temperatures between 68F and 113F, with optimal temperatures at 99F.

Yes, we do have a power purchase agreement with East Kentucky Power and Taylor County RECC.

Mac Farms, Inc. accepts paper pulp sludge, stillage, food waste, some DAF sludge, and some types of FOG. At this time, we do not accept unpackaged waste streams, but can accept both thick or thin stillage. Mac Farms, Inc. does not accept any type of human waste.

My Farm Mac Os Download

Digestate collected at the end of the process is used as a liquid fertilizer for our crops.

Tipping fees are based on the type of waste and how difficult it is to process. Feel free to contact us if you would like to discuss applicable fees for your business.

My Farm Mac Os X

No, however feed stock temperatures are considered in tipping fee pricing.